Distributed abstraction and verification of an installed optical fibre network.

The management of wavelength routed optical mesh networks is complex with many potential light path routes and numerous physical layer impairments to transmission performance. This complexity can be reduced by applying the ideas of abstraction from computer science where different equipment is described in the same basic terms. The noise-to-signal ratio can be used as a metric to describe the quality of transmission performance of a signal propagated through a network element and accumulates additively through a sequence of such elements allowing the estimation of end-to-end performance. This study aims to explore the robustness of the noise-to-signal ratio metric in an installed fibre infrastructure. We show that the abstracted noise-to-signal ratio is independent of the observers and their location. We confirm that the abstracted noise-to-signal ratio can reasonably predict the performance of light-paths subsequently set in our network. Having a robust network element abstraction that can be incorporated into routeing engines allows the network management controller to make decisions on the most effective way to use the network resources in terms of the routeing and data coding format.

Software defined networking (SDN) over space division multiplexing (SDM) optical networks: features, benefits and experimental demonstration.

We present results from the first demonstration of a fully integrated SDN-controlled bandwidth-flexible and programmable SDM optical network utilizing sliceable self-homodyne spatial superchannels to support dynamic bandwidth and QoT provisioning, infrastructure slicing and isolation. Results show that SDN is a suitable control plane solution for the high-capacity flexible SDM network. It is able to provision end-to-end bandwidth and QoT requests according to user requirements, considering the unique characteristics of the underlying SDM infrastructure.

Fully-elastic multi-granular network with space/frequency/time switching using multi-core fibres and programmable optical nodes.

We present the first elastic, space division multiplexing, and multi-granular network based on two 7-core MCF links and four programmable optical nodes able to switch traffic utilising the space, frequency and time dimensions with over 6000-fold bandwidth granularity. Results show good end-to-end performance on all channels with power penalties between 0.75 dB and 3.7 dB.

Experimental demonstration of an OpenFlow based software-defined optical network employing packet, fixed and flexible DWDM grid technologies on an international multi-domain testbed.

Software defined networking (SDN) and flexible grid optical transport technology are two key technologies that allow network operators to customize their infrastructure based on application requirements and therefore minimizing the extra capital and operational costs required for hosting new applications. In this paper, for the first time we report on design, implementation & demonstration of a novel OpenFlow based SDN unified control plane allowing seamless operation across heterogeneous state-of-the-art optical and packet transport domains. We verify and experimentally evaluate OpenFlow protocol extensions for flexible DWDM grid transport technology along with its integration with fixed DWDM grid and layer-2 packet switching.

Experimental demonstration of gridless spectrum and time optical switching.

An experimental demonstration of gridless spectrum and time switching is presented. We propose and demonstrate a bit-rate and modulation-format independent optical cross-connect architecture, based on gridless spectrum selective switch, 20-ms 3D-MEMS and 10-ns PLZT optical switches, that supports arbitrary spectrum allocation and transparent time multiplexing. The architecture is implemented in a four-node field-fiber-linked testbed to transport continuous RZ and NRZ data channels at 12.5, 42.7 and 170.8 Gb/s, and selectively groom sub-wavelength RZ channels at 42.7 Gb/s. We also showed that the architecture is dynamic and can be reconfigured to meet the routing requirements of the network traffic. Results show error-free operation with an end-to-end power penalty between 0.8 dB and 5 dB for all continuous and sub-wavelength channels.

A novel ingress node design for video streaming over optical burst switching networks.

This paper introduces a novel ingress node design which takes advantage of video data partitioning in order to deliver enhanced video streaming quality when using H.264/AVC codec over optical burst switching networks. Ns2 simulations show that the proposed scheme delivers improved video traffic quality without affecting other traffic, such as best effort traffic. Although the extra network load is comparatively small, the average gain in video PSNR was 5 dB over existing burst cloning schemes, with a maximum end-to-end delay of 17 ms, and jitter of less than 0.35 ms.

Field trial of a 1.5 Tb/s adaptive and gridless OXC supporting elastic 1000-fold all-optical bandwidth granularity.

An adaptive gridless OXC is implemented using a 3D-MEMS optical backplane plus optical modules (sub-systems) that provide elastic spectrum and time switching functionality. The OXC adapts its architecture on demand to fulfill the switching requirements of incoming traffic. The system is implemented in a seven-node network linked by installed fiber and is shown to provide suitable architectures on demand for three scenarios with increasing traffic and switching complexity. In the most complex scenario, signals of mixed bit-rates and modulation formats are successfully switched with flexible per-channel allocation of spectrum, time and space, achieving over 1000-fold bandwidth granularity and 1.5 Tb/s throughput with good end-to-end performance.

Gridless optical networking field trial: flexible spectrum switching, defragmentation and transport of 10G/40G/100G/555G over 620-km field fiber.

We present results from the first gridless networking field trial with flexible spectrum switching nodes and 620 km of installed fibre links. Signals at 10G, 12.25G, 42.7G, DP-QPSK 40G, DP-QPSK 100G and 555G are generated, successfully transported and switched using flexible, custom spectrum allocation per channel. Spectrum defragmentation is demonstrated using integrated SOA-MZI wavelength converters. Results show error-free end-to-end performance (BER<1e-9) for the OOK channels and good pre-FEC BER performance with sufficient margin to FEC limit for the 40G and 100G coherent channels as well as for the 555G super-channel.

Optical grooming switch with regenerative functionality for transparent interconnection of networks.

We demonstrate a regenerative optical grooming switch for buffer-less interconnection of metro/access and metro/core ring networks with switching functionality in time, space and wavelength domain. Key functionalities of the router are the traffic aggregation with time-slot interchanging (TSI) functionality, the WDM-to-ODTM multiplexing and the OTDM-to-WDM demultiplexing of high-speed channel into lower bit-rate tributaries as well as multi-wavelength all-optical 2R regeneration of several higher-speed signals. BER and Q-factor measurements of different switching scenarios show excellent performance with no error floor and Q-factors above 21 dB.

40 Gbit/s asynchronous digital optical regenerator.

We present the first experimental demonstration of an asynchronous digital optical regenerator at 42.67 Gbit/s. The system effectively retimes incoming asynchronous data bursts to a local clock without burst mode clock recovery and converts the signal to a desired wavelength and duty cycle.

Optical node with time-space-and-wavelength domain contention resolution, deflection and dropping capability.

We experimentally demonstrate an optical node with time-space-and- wavelength domain contention resolution, deflection and dropping capability. The node is composed of an optical buffer based on an optical crossconnect and a wavelength converter. Although the experimental results are shown at 10 Gbit/s the bitrate can be increased substantially. Bit-error rate measurements are shown, sustaining only 3.5 dB power penalty after 10mus of optical buffering and agile wavelength conversion over 18nm span.